Prüfung HP0-J65, zertifizierung HP0-J65 Designing HP SAN Networking Solutions www.it-pruefungen.ch

Q1
To install additional switches, you must determine the ideal ISL ratio. Which ISL ratio range is recommended for less I/O intensive application requirements (less than 70 MB/s at 2 Gb/s, less than 140 MB/s at 4 Gb/s, less than 280 MB/s at 8 Gb/s)?

A. 3:1 to 1:1
B. 1:1 to 3:1
C. 15:1 to 7:1
D. 7:1 to 15:1

Answer: D

Explanation:
Recommended core-edge fabric ISL ratios
I/O workload Recommended ratios
Higher I/O data intensive application requirements (greater than 70 MB/s at 1:1 to 3:1 2 Gb /s, greater than 140 MB/s at 4 Gb /s, greater than 280 MB/s at 8 Gb /s) Lower I/O data intensive application requirements (<70MB/s at 2 Gb / s,

Q2
Which Fibre Channel timing variables must match in an interoperable fabric?

A. Timing variables do not need to match.
B. R_A_TOV, E_D_TOV and B_B_TOV
C. R_A_TOV and E_D_TOV
D. R_A_TOV and B_B_TOV

Answer: C

Q3
You are preparing an installation plan for implementing a new SAN design and want to ensure all customer needs are included. Which data collection method requires that you create a process list and review all relevant stakeholders?

A. Card Arrangement
B. Information Extraction
C. Brainstorming
D. Process Mapping

Answer: B

HP0-J65 Prüfungsfragen, HP0-J65 Examensfragen Designing HP SAN Networking Solutions (ICND2 v3.0)  https://www.it-pruefungen.ch/HP0-J65.htm

Q4
Which information should be included in the topology map documentation of a SAN design provided to your support organization? (Select two.)

A. serial numbers of connected servers
B. SAN switch zoning configurations
C. storage controller operating mode parameters
D. IP addresses of the connected servers
E. World Wide Names of all nodes and devices

Answer: B,E

Q5
You are implementing a SAN infrastructure including an HP StorageWorks EVA4400 at Your customer site. The customer is interested in using three-site cascaded replication functionality. What should you recommend to accomplish this? (Select two)

A. HP StorageWorks FlexCopy
B. HP Continuous Access EVA
C. additional disks in the EVA
D. HP Virtual Replicator
E. HP Business Copy EVA

Answer: B,E

HP0-J65 Prüfungsvorbereitung Studienmaterial deutsch Designing HP SAN Networking Solutions www.it-pruefungen.ch

Q6
Which HP tool provides the ability to create a Microsoft Visio diagram of a SAN topology for your customer documentation?

A. SAN Health
B. SAN Designer
C. SAN Visibility
D. SAN Navigator

Answer: C

HP0-J64 Prüfung, HP0-J64 zertifizierung Designing HP Enterprise Storage Solutions www.it-pruefungen.ch

QUESTION: 1

Scenario

Following the merger of two financial companies, management is considering combining the two distinct customer call centers into a single physical location. In addition to the overall call center headcount increasing by 30%, the support for two distinct customer bases presents the potentialof having two different desktop PCs on the desk of each call center employee. Instead of correspondingly increasing IT support headcount to manage the single, larger call center and call center infrastructure, management believes they can reduce the required time to support call center operations by 40% if they employ virtual desktop technology.

An initial assessment has identified the need for a centralized storage solution that could support 500 virtual desktops running a variety of applications that can scale quickly to accommodate an expected increase in call center staff. The customer is already an HP Blade System customer using HP Virtual Connect Flex-10.

Some of the additional business criteria identified in customer planning interviews includes:

Use client virtualization for the desktops.
Achieve the highest possible density and performance for the virtual desktops,but keep the virtual desktop storage traffic off the network due to a current, existing limitation of only 1GbE.
Do not use standalone, network-attached storage.
Limit the impact of additional rack space.
Minimize the risk of additional help-desk tickets. Present multiple solutions, prioritized with a recommendation.

Refer to the scenario.

You suggest VMware View as a solution component to solve some of the customer business challenges.

Which step should you take next to ensure that the solution meets HP best practices for VMware View?

A. Validate compatibility using HP Single Point of Connectivity Knowledge(SPOCK).
B. Validate configuration using the HP SAN Design Reference Guide.
C. Create the HP Virtualization Bundle configuration in SalesBUILDER for Windows to validate connectivity.
D. Compare the design to the HP Client Virtualization Enterprise Reference Architecture.

Answer: D

Explanation:
http://h20195.www2.hp.com/V2/GetPDF.aspx%2F4AA3-5327ENW.pdf Enterprise Reference Architecture for Client Virtualization for HP VirtualSystem Implementing the HP Architecture for Citrix XenDesktop on Microsoft Windows Server 2008 R2 Hyper-V.
http://h20195.www2.hp.com/V2/GetPDF.aspx%2F4AA4-2003ENW.pdf HP Gen8 Client Virtualization Enterprise Reference Architecture for VMware View 5.1

QUESTION: 2

A customer is planning to move four HP BladeSystem c7000s to another location. The Onboard Administrator firmware is at the current version. The disk drives and Virtual Connect Flex-10 modules must be removed before shipment.

Which design impact must be considered if the Virtual Connect Flex-10 modules are not reinstalled in their original locations?

A. The Virtual Connect configurations on the installed chassis will be overwritten.
B. The blade chassis will be reset to factory defaults.
C. The original Virtual Connect configurations will remain intact.
D. All server network and SAN connections will be disabled.

Answer: D

Explanation:
http://h20565.www2.hp.com/portal/site/hpsc/template.BINARYPORTLET/public/kb/docDisp lay/resource.process/?spf_p.tpst=kbDocDisplay_ws_BI&spf_p.rid_kbDocDisplay=docDispl ayResURL&javax.portlet.begCacheTok=com.vignette.cachetoken&spf_p.rst_kbDocDisplay =wsrp-resourceState%3DdocId%253Demr_na-c03801914- 2%257CdocLocale%253D&javax.portlet.endCacheTok=com.vignette.cachetoken

Connecting multiple enclosures
Virtual Connect supports the connection of up to four c7000 enclosures, which can reduce the number of network connections per rack and also enables a single VC Manager to control multiple enclosures. A single set of cables can be used to carry all external Ethernet traffic from a single rack.
Multiple enclosure support enables up to four c7000 enclosures to be managed within a single Virtual Connect domain.

QUESTION: 3

Which HP MSA storage solution provides support for SSD and replication?

A. HP MSA 1040
B. HP MSA 2040
C. HP MSA P2000 G3 Combo controller
D. HP MSA P2000 G3

Answer: B

Reference:http://h20195.www2.hp.com/v2/GetPDF.aspx%2F4AA4-6608ENW.pdf(page 1)

HP0-J64 Prüfungsfragen, HP0-J64 Examensfragen Designing HP Enterprise Storage Solutions (ICND2 v3.0)  https://www.it-pruefungen.de/HP0-J64.htm

QUESTION: 4

You are responding to a request for proposal (RFP) for a new HP 3PAR StoreServ array. The company decision-market has asked you to justify the cost of the array.

Which benefits of the Alinean ROI Analysts should be included in the business case to justify the cost of the array (Select three)

A. regulatory documentation
B. payback period
C. competitive data
D. internal rate of return (IRR)
E. value proposition
F. architecture of the array

Answer: B,D,E

Explanation: http://www.certificationexplorer.com/Documents/HP0-J64.pdf

QUESTION: 5

What drives the growth of unstructured data?

A. Increases in cloud-based storage systems
B. Rapidly lowered disks costs
C. Rapidly changing strategies and company agility
D. Digitization of a wide-range of industries

Answer: D

Prüfungsvorbereitung HP0-J64 Studienmaterial deutsch Designing HP Enterprise Storage Solutions www.it-pruefungen.ch

QUESTION: 6

Which HP 3PAR StoreServ software gives the customer the ability to specify a minimum number of IOPs for a volume set?

A. HP 3PAR StoreServ Dynamix Optimization
B. HP 3PAR StoreServ Performance Advisor
C. HP 3PAR StoreServ Adaptive Optimization
D. HP 3PAR StoreServ Enhanced Priority Optimization

Answer: C

Explanation:

HP 3PAR Adaptive Optimization and QoS can cooperate, but HP 3PAR Adaptive Optimization data migration may impact latency goal settings. For example, when a workload is partially migrated from Fibre Channel drives into NL ones after the collection and analysis of the I/O access pattern by HP 3PAR Adaptive Optimization, depending on the host access I/O pattern, this may have a negative impact on latency and trigger workloads to be throttled towards their in goal. This is an expected behavior if the QoS rule was modeled after the Fibre Channel performance.